Certified Concrete Moisture Testing in Auckland & NZ-Wide
- Site Inspections in Auckland & throughout NZ
- Certified Moisture Testing
- Flooring and Substrate Specifications
- Project Management for Flooring Preparation Work
- Assistance with Dispute Resolution
- Problem Solving for Flooring Failures
- Reports/Readings for Legal Purposes
- Technical Flooring Advice
Concrete Moisture Testing Auckland
Protect Your Flooring From Moisture Damage
Concrete moisture testing is a crucial step that is often overlooked before flooring installation. Moisture in concrete slabs is one of the leading causes of floor covering failures.
Whether you’re installing vinyl, timber, carpet or tiles, it’s vital to check the moisture levels of the concrete slab first. Trapped moisture can lead to expensive issues, such as mould, discolouration, or warping and lifting of flooring.
Certified Concrete Moisture Testing, Trusted Results
At Flooring Insight, we provide certified concrete moisture testing in Auckland for homeowners, builders, and flooring installers. Our testing helps ensure your slab is dry enough for flooring – avoiding delays, damage, and costly mistakes.
Our goal is to give you clear, unbiased information before flooring installation – saving you time, stress, and money down the line.
Fast Turnaround Across Auckland
We service all of Auckland, including the North Shore, West Auckland, Central Auckland, East Auckland, and South Auckland.
Whether it’s a new build, renovation, or insurance job, we provide fast testing, reliable reports, and clear advice.
Services Available NZ-Wide
We are based in the Auckland Region; however, our moisture testing services are available and often used throughout New Zealand.
CONTACT US
FAQs: Concrete Moisture Testing in Auckland
Why does concrete moisture testing matter?
Even when concrete feels dry to the touch, excess internal moisture can still be present. If it’s not tested and managed properly, it can lead to:
- Blistering or lifting of vinyl or LVT
- Cupping or warping of timber or laminate
- Mould or mildew under carpet
- Adhesive breakdown and failed warranties
We use certified testing methods to accurately measure the moisture levels in your slab so you can install your flooring with confidence.
What does a concrete moisture test involve?
We drill or prepare small areas of the concrete slab, insert RH sensors or calcium chloride kits, and return after 24 hours to collect the data.
How long does a concrete moisture test take?
Installation takes 30–90 minutes depending on the job. RH tests require a 24-hour reading period.
When should I book a concrete moisture test?
Book your test at least 24 hours before flooring installation. Earlier is better if construction moisture is suspected.
What if the concrete moisture levels are too high?
We’ll provide clear advice on mitigation options such as moisture barriers, dehumidification, or allowing more drying time.
Do I need this test for flooring warranties?
Some flooring manufacturers do require concrete moisture testing to maintain product warranties. Check the warranty details on your flooring product.
Honest and Unbiased
We don’t sell or install flooring. That means our moisture assessments are 100% independent and unbiased. We provide moisture testing for both new and old concrete slabs. Our assessments are based on accurate data collected using certified methods, so you can trust the results.
All testing is carried out by certified moisture technicians, including New Zealand’s only ICRI Certified Moisture Testing Technician. This international certification ensures our process meets the highest standards and is recognised in legal or warranty situations if needed. You can view the official certification list on the ICRI website.
ICRI Certified Process
At Flooring Insight, we follow a trusted moisture testing system developed by the International Concrete Repair Institute (ICRI). This standard is recognised worldwide and is suitable for both residential and commercial projects.
Our testing provides the key information you need before installing flooring or coatings over concrete. This includes products like timber, vinyl, tiles, carpet, and floor levelling compounds.
We aim to deliver your results within 24 hours, so you can move forward with confidence and avoid costly flooring issues.
Peace of Mind
Just because a concrete slab looks dry, or has been down for months or even years, doesn’t mean it’s ready for flooring. Moisture can still be present, especially in Auckland’s humid climate, which is known to contribute to building moisture issues.
Our testing gives you a clear “go” or “no-go” result, so you can move forward with confidence and avoid costly problems down the track. It’s a simple step that can save a lot of stress later.
Relevant Standards
We are certified in the below ASTM standards:
- ASTM F2170 Relative Humidity
- ASTM F1869 Calcium Chloride
- ASTM F710 Alkalinity and pH Testing
- ASTM F3191 Porosity Testing
- ASTM F2659 Non Invasive
Honest and Unbiased
We don’t sell or install flooring. That means our moisture assessments are 100% independent and unbiased. We provide moisture testing for both new and old concrete slabs. Our assessments are based on accurate data collected using certified methods, so you can trust the results.
All testing is carried out by certified moisture technicians, including New Zealand’s only ICRI Certified Moisture Testing Technician. This international certification ensures our process meets the highest standards and is recognised in legal or warranty situations if needed. You can view the official certification list on the ICRI website.
ICRI Certified Process
At Flooring Insight, we follow a trusted moisture testing system developed by the International Concrete Repair Institute (ICRI). This standard is recognised worldwide and is suitable for both residential and commercial projects.
Our testing provides the key information you need before installing flooring or coatings over concrete. This includes products like timber, vinyl, tiles, carpet, and floor levelling compounds.
We aim to deliver your results within 24 hours, so you can move forward with confidence and avoid costly flooring issues.
Peace of Mind
Just because a concrete slab looks dry, or has been down for months or even years, doesn’t mean it’s ready for flooring. Moisture can still be present, especially in Auckland’s humid climate, which is known to contribute to building moisture issues.
Our testing gives you a clear “go” or “no-go” result, so you can move forward with confidence and avoid costly problems down the track. It’s a simple step that can save a lot of stress later.
Relevant Standards
We are certified in the below ASTM standards:
- ASTM F2170 Relative Humidity
- ASTM F1869 Calcium Chloride
- ASTM F710 Alkalinity and pH Testing
- ASTM F3191 Porosity Testing
- ASTM F2659 Non Invasive
Arrange a Consultation
Why Choose Flooring Insight?
Independent
Certified Testing Results
Highly Experienced